Power on Rig

Once you are setup and ready to power on your rig, follow these steps

- Plug in your power cables

- Switch on your Power Supply, if your unit is fitted with 2 or more then ensure they are all set to on. 0 for OFF and I for ON

- Turn on using the switch on the column

Your rig should now power on with all fans running. If you have plugged in GPU / Video Cards these may run a fan for 30 seconds then power down, This is normal, and the fans will kick in again when you begin to mine.

Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page